Paints aerosols/gallons  Page:  Previous    1  -  2  -  3    Next  

PROTECTGLOVE PROTECTIVE HAND BARRIER CREAM

PROTECT GLOVE CONDITIONS,PROTECTS AND CONTAINS LANOLIN TO PREVENT CHAPPING AND CRACKING OF HANDS.

 

PROTECTS FROM IRRITANTS SUCH AS PAINTS, INKS, SALTS, ACIDS,CORROSIVE ALKALIS, INDUSTRIAL GRIME ,GREASE,SOLVENTS,PAINT RESINS AND TAR ETC.


THIS PROUCT IS PACKAGED IN A BOX OF 12 AEROSOLS.

Item #640AE

Price: $175.00  Sale price $150.00

Click for details

QUIK STRIP
QUIK STRIP IS OUR MOST AGGRESSIVE GRAFFITI REMOVER. SHOULD ONLY BE USED ON SURFACES WHERE COMPLETE PAINT REMOVAL IS REQUIRED IE CONCRETE WALLS,BRICK,METAL AND UNPAINTED SURFACES. QUIK STRIP BURNS IT OFF QUICKLY! Item #691AE

Price: $195.00  Sale price $180.00

Click for details

Red Oxide Primer Sure Shot
Red Oxide Primer Coating for bare metal and wood Surfaces
Fast Dry
Sag Free
Indoor/Outdoor durability
Effective Againts Rust and Chemicals
6 pack
Item #PaintPrimer Red

Price: $65.00  Sale price $50.00

Click for details

Rust Converting Spray

Convert-A
converts rusted surfaces into an inert  black polymered surfaces which protects surfaces
and prevents future rusting.

Convert is paintable but painting is not neccesary for great protection.

packaged in a box of 12 aerosols for only  $195.00!

Item #320aeb

Price: $215.00  Sale price $195.00

Click for details

Shield Anti Graffit coating
SHIELD ANTI GRAFFITI COATING FORMS A BARRIER TO PAINT,MAGIC MARKERS,INK ETC. STICKERS WILL NOT ADHERE TO SURFACES SPRAYED WITH THIS CLEAR UV STABLE FORMULATION.
GRAFFITI CAN BE REMOVED WITH A SOFT CLOTH,PAPER TOWEL OR EASILY COMPLETELY LIFTED WITH SCOTCH TAPE. GREAT FOR SIGNS,MURALS,PAINTED WALLS, BATHROOM PARTIONS ,TOILET TISSUE HOLDERS,TOILET SEAT COVER DISPENSERS,OR ANY SURFACE!

PACKAGED IN BOXES OF 12 AEROSOLS. AVAILABLE IN GALLONS AND BULK TOO! 
Item #755AEB

Sale price $350.00

Click for details

Shield Anti Graffit Coating Each

SHIELD ANTI GRAFFITI COATING FORMS A BARRIER TO PAINT,MAGIC MARKERS,INK ETC. STICKERS WILL NOT ADHERE TO SURFACES SPRAYED WITH THIS CLEAR UV STABLE FORMULATION.
GRAFFITI CAN BE REMOVED WITH A SOFT CLOTH,PAPER TOWEL OR EASILY COMPLETELY LIFTED WITH SCOTCH TAPE. GREAT FOR SIGNS,MURALS,PAINTED WALLS, BATHROOM PARTIONS ,TOILET TISSUE HOLDERS,TOILET SEAT COVER DISPENSERS,OR ANY SURFACE!


Sold in quantities of 1 or more to accomodate client needs!

Item #756e

Price: $40.00  Sale price $35.00

Click for details

SHIELD ANTI GRAFFITI COATING (CASE)

SHIELD anti graffiti coating in gallons is clear and has been successfully used on:

brick,stucco,concrete,metal,painted surfaces,bathroom partitions, murals and some plastics etc.

SHIELD  renders your surface impervious to:

paints,magic markers,crayolas,stickers, lipstick, ink pens ,sharpies etc.

Apply by brush,roller or sprayer.

Mix activator with base at site of project.

Each gallon covers 850 sq feet.

$600.00 CASE (4 GALLONS WITH ACTIVATOR)

Is available in clear glossy or flat finish. Characterisitics include resistance to uva/uvb sun rays,expands in hot weather  contracts in cold weather.

Will not yellow,flake,peel or crack.This is a permanent not sacrificial coating. Available in custom colors also.Pre-pay only.Note no returns or refunds on custom colors.


Item #BU2709

Price: $750.00  Sale price $600.00

Click for details

SHIELD ANTI GRAFFITI COATING (GALLON)S)

SHIELD anti graffiti coating in gallons is clear and has been successfully used on:

brick,stucco,concrete,metal,painted surfaces,bathroom partitions, murals and some plastics etc.

SHIELD  renders your surface impervious to:

paints,magic markers,crayolas,stickers, lipstick, ink pens ,sharpies etc.

Apply by brush,roller or sprayer.

Mix activator with base at site of project.

Each gallon covers 850 sq feet.


Is available in clear glossy or flat finish. Characterisitics include resistance to uva/uvb sun rays,expands in hot weather  contracts in cold weather.

Will not yellow,flake,peel or crack.This is a permanent not sacrificial coating. Available in custom colors also.Pre-pay only.Note no returns or refunds on custom colors.


$165.00 GALLON

Item #BU2707

Price: $175.00  Sale price $165.00

Click for details

Stainless steel coating

Tough, high temperature coating made with pure stainless steel flakes and a highly resistant epoxy resin. Extremely impervious to temperature fluctuations, harsh chemical environments, severe weather, and abrasion. Provides a smooth, high gloss, stainless steel finish. Protects surfaces at temperatures up to 400°F. Resists acids, alkalis, and other chemical deterioration. For use in chemical plants, food processing plants, and industrial plants.

Item #paintstainless

Price: $285.00  Sale price $260.00

Click for details

Step Safe Aerosol Epoxy Slip Resistant Coating

STEP SAFE AEROSOL

STEP SAFE is an ideal coating for Steps, Metal Roofs, Tile, Sidewalks, Vehicles, patios, pavement around a pool, on a boat, boat trailer, in the laundry room, bathroom, and in industrial work spaces where firmer footing is needed. It can be used on steel, fiberglass, treated aluminum, concrete, wood and other surfaces. STEP SAFE will provide a surface with a grit which make slips less likely, even when wet. Special features of this coating include:

* Quick dry and easier on wet feet * Brushes, tools and equipment clean up with soap and water 


Stock Colors are Black and Clear which blends with any surface.

However special colors are available but require minimum orders.

* Applies easily over oil or waterbase primers * STEP SAFE is self priming on most surfaces *

PRECAUTIONS: DO NOT use on garage floors or other areas where vehicles are parked or on smooth glossy surface such as ceramic tile. DO NOT USE in areas where there is continuous standing water. Use STEP SAFE  in the aerosol can for tubs and showers.

PREPARATION: Surface must be clean, dry and free of oil, gas, dirt, soap, rust or mill scale. Clean surface with TSP, rinse thoroughly and let dry. Deteriorating or chalking surfaces should be cleaned with a wire brush, power scraper or sandblast. Ferrous metal does not need a primer unless it is needed for rust resistance. Firm foot will work well over the top of most rust resistant metal primers. Lightly sand Fiberglass or wipe with Acetone before painting. Treat new and smooth concrete with a concrete etch solution before painting. Concrete should not be painted until it is at least 60 days old. Treat Aluminum with a pretreatment compound before painting. STEP SAFE can be used directly on wood surfaces in one or two coats depending upon the porosity of the wood (thin first coat). However, better results may be obtained on exterior wood surfaces primed with a good exterior primer.

PREVIOUSLY PAINTED SURFACES: Dull glossy surfaces with chemical gloss remover, #3 steel wool or 200 grit sandpaper. Wash off all dirt, grease, soap, oil build-up with TSP and water. Rinse thoroughly. Remove loose paint and patch holes and cracks. Spot prime bare spots with appropriate primer or a first coat of thinned STEP SAFE.  WARNING!  If you scrape, sand or remove old paint from any surface, you may release lead dust.  LEAD IS TOXIC.  EXPOSURE TO LEAD DUST CAN CASE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN.  PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.  Wear a NIOSH-approved respirator to control lead exposure.  Carefully clean up with a wet mop or HEPA vacuum.  Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

APPLICATION: STIR OR SHAKE WELL BEFORE USING. Air and surface temperature must be above 50° F during and 8 hours after application. Apply with nylon bristle brush or roller. If a second coat is desired, allow 1 to 2 hours between applications, or until tack free. Dries to the touch in 30 to 40 minutes. Dries hard in 72 hours or more depending on atmospheric temperature. DO NOT USE for airless spray application.  Firm Foot may be sprayed through a conventional spray system, however the grit may plug and can damage spray tips.

TOUCH UP: Touch up can be done with this product or with the aerosol STEP SAFE   in matching colors. Touch up frequency depends upon wear. Allow STEP SAFE  to cure for at least 8 hours before subjecting to light traffic and 48 hours before exposure to heavy use. Do not let water stand on newly painted surface for two weeks.

THINNING: First coat may be thinned with no more than one pint per gallon of water. Second coat should be applied at package consistency. DO NOT ADD ANYTHING TO THIS PRODUCT OTHER THAN WATER.

COVERAGE: 300 to 500 square feet per gallon depending upon surface absorption and smoothness. Coverage greatly increases over nonporous and properly primed surfaces.

CLEAN UP: Clean up with soap and water.

Contains 2-Butoxyethanol (111-76-2).

Vapor harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Causes nose and throat irritation.

NOTICE: Repeated and prolonged exposure to solvents may cause permanent brain and nervous system damage. In addition, inhaling the concentrated contents is harmful and may be fatal. Contains materials which may cause blood, liver and kidney damage.

Use only with adequate ventilation. Do not breathe vapors or spray mist. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH approved) during and after application. Failure to wear proper respiratory protection may result in permanent brain and nervous system damage. Follow respirator manufacturer’s directions for respirator use. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.

FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately. Wash clothing before reuse. If swallowed, get medical attention immediately.

If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.

Read Material Safety Data Sheet Before Using This Product!

IMPORTANT! Do not add any materials to this paint other than those specified in these instructions.

DO NOT TRANSFER TO UNLABELED CONTAINER · KEEP OUT OF REACH OF CHILDREN


Click Details for MSDS

Item #810aeb

Colors

Price: $350.00  Sale price $295.00

Click for details

STEP SAFE GALLONS EPOXY SLIP RESISTANT COATING

STEP SAFE BULK

PRICED AND PACKAGED FOR 4 GALLONS PER BOX

STEP SAFE is an ideal coating for Steps, Metal Roofs, Tile, Sidewalks, Vehicles,  patios, pavement around a pool, on a boat, boat trailer, in the laundry room, bathroom, and in industrial work spaces where firmer footing is needed. It can be used on steel, fiberglass, treated aluminum, concrete, wood and other surfaces. STEP SAFE will provide a surface with a grit which make slips less likely, even when wet. Special features of this coating include:

* Quick dry and easier on wet feet * Brushes, tools and equipment clean up with soap and water *

* Applies easily over oil or waterbase primers * STEP SAFE is self priming on most surfaces *

PRECAUTIONS: DO NOT use on garage floors or other areas where vehicles are parked or on smooth glossy surface such as ceramic tile. DO NOT USE in areas where there is continuous standing water. Use STEP SAFE  in the aerosol can for tubs and showers.

PREPARATION: Surface must be clean, dry and free of oil, gas, dirt, soap, rust or mill scale. Clean surface with TSP, rinse thoroughly and let dry. Deteriorating or chalking surfaces should be cleaned with a wire brush, power scraper or sandblast. Ferrous metal does not need a primer unless it is needed for rust resistance. Firm foot will work well over the top of most rust resistant metal primers. Lightly sand Fiberglass or wipe with Acetone before painting. Treat new and smooth concrete with a concrete etch solution before painting. Concrete should not be painted until it is at least 60 days old. Treat Aluminum with a pretreatment compound before painting. STEP SAFE can be used directly on wood surfaces in one or two coats depending upon the porosity of the wood (thin first coat). However, better results may be obtained on exterior wood surfaces primed with a good exterior primer.

PREVIOUSLY PAINTED SURFACES: Dull glossy surfaces with chemical gloss remover, #3 steel wool or 200 grit sandpaper. Wash off all dirt, grease, soap, oil build-up with TSP and water. Rinse thoroughly. Remove loose paint and patch holes and cracks. Spot prime bare spots with appropriate primer or a first coat of thinned STEP SAFE.  WARNING!  If you scrape, sand or remove old paint from any surface, you may release lead dust.  LEAD IS TOXIC.  EXPOSURE TO LEAD DUST CAN CASE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN.  PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.  Wear a NIOSH-approved respirator to control lead exposure.  Carefully clean up with a wet mop or HEPA vacuum.  Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

APPLICATION: STIR OR SHAKE WELL BEFORE USING. Air and surface temperature must be above 50° F during and 8 hours after application. Apply with nylon bristle brush or roller. If a second coat is desired, allow 1 to 2 hours between applications, or until tack free. Dries to the touch in 30 to 40 minutes. Dries hard in 72 hours or more depending on atmospheric temperature. DO NOT USE for airless spray application.  Firm Foot may be sprayed through a conventional spray system, however the grit may plug and can damage spray tips.

TOUCH UP: Touch up can be done with this product or with the aerosol STEP SAFE   in matching colors. Touch up frequency depends upon wear. Allow STEP SAFE  to cure for at least 8 hours before subjecting to light traffic and 48 hours before exposure to heavy use. Do not let water stand on newly painted surface for two weeks.

THINNING: First coat may be thinned with no more than one pint per gallon of water. Second coat should be applied at package consistency. DO NOT ADD ANYTHING TO THIS PRODUCT OTHER THAN WATER.

COVERAGE: 300 to 500 square feet per gallon depending upon surface absorption and smoothness. Coverage greatly increases over nonporous and properly primed surfaces.

CLEAN UP: Clean up with soap and water.

Contains 2-Butoxyethanol (111-76-2).

Vapor harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Causes nose and throat irritation.

NOTICE: Repeated and prolonged exposure to solvents may cause permanent brain and nervous system damage. In addition, inhaling the concentrated contents is harmful and may be fatal. Contains materials which may cause blood, liver and kidney damage.

Use only with adequate ventilation. Do not breathe vapors or spray mist. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH approved) during and after application. Failure to wear proper respiratory protection may result in permanent brain and nervous system damage. Follow respirator manufacturer’s directions for respirator use. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.

FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately. Wash clothing before reuse. If swallowed, get medical attention immediately.

If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.

Read Material Safety Data Sheet Before Using This Product!

IMPORTANT! Do not add any materials to this paint other than those specified in these instructions.

DO NOT TRANSFER TO UNLABELED CONTAINER · KEEP OUT OF REACH OF CHILDREN

CLICK DETAILS FOR MSDS

Item #BU2751

Colors

Price: $700.00  Sale price $595.00

Click for details

Sure Seal Clear RTV Silicone
Rtv clear Caulk and Sealant.
Seals ,Bonds, Insulattes
                             FLEXIBLE*WATERPROOF*WEATHERPROOF
Hvac usage to seak=l condensation pan pin holes
Cauks tubs,sinks,showers and plumbing fixtures
Seals windows,doors,tile and marble etc
Flexible from -60 - +500F
 
Click Photo For Larger and more concise Image !
Item #sprodsuresealc6

Price: $195.00  Sale price $150.00

Click for details

WE GLADLY ACCEPT ALL OF YOUR MAJOR CREDIT CARDS ;INCLUDING VISA,MASTERCARD,DISCOVER ,PAYPAL AND AMERICAN EXPRESS.


AND FOR YOUR CONVENIENCE WE WILL PROCESS EMAIL ,FAX AND TELEPHONE ORDERS AS WELL.

EMAIL US AT:N2WINNERCHEMICAL@AOL.COM
FAX: 909-886-9010 
PHONE TOLL FREE: 1-877-597-6261

 Page:  Previous    1  -  2  -  3    Next