• Sink traps

QUIK STEEL-REINFORCED EPOXY PUTTY STICK®

Repair and rebuild anything made of steel!!

Made in U.S.A.

• The ultimate solution for small or

emergency repairs

• Easy-to-use and mistake-proof

• Bonds instantly with superior strength

• Saves hundreds of dollars in repairs

• Belongs in every toolbox

Seals leaks in

Product Description

QUIK STEEL  Epoxy Putty Stick is a fast-setting, industrial-strength polymer

compound that enables permanent repairs to anything

made of steel or other metals. Each handy stick contains

pre-measured portions of activator and base throughout — no

measuring or mixing tools are necessary. As the epoxy is mixed,

the two contrasting colors blend into one color to indicate

complete mixing. The consistency (like modeling clay) eliminates

drips and runs, facilitates adhesion to the substrate, and allows

the material to be shaped and formed as needed before curing

begins. Once functional cure is reached (within minutes after

application), it can be tapped, drilled, sawed, machined, filed,

ground, or painted. QUIK STEEL  cures to a dark gray metallic color.

It is non-rusting. Suitable for interior or exterior use, it is resistant

to water, chemicals, and temperature extremes. QUIK STEEL  contains

no solvents or VOCs. It's non-flammable and releases no noxious

fumes. It won't shrink or pull away. The unused portion stays fresh

for future use when saved in its original package.

Performance Data*

SHELF LIFE AT 75°F (24°C), minimum 24 months

SHORE D HARDNESS AT FULL CURE (24 hrs) 80

LAP SHEAR TENSILE STRENGTH

On steel (1" x 1" x 1/16") 900 lbs (6.2 MPa)

COMPRESSIVE STRENGTH 8,000 psi (55 MPa)

DENSITY 18.5 lb/gal, 2.2 gm/cm3

SHRINKAGE <1%

NON-VOLATILE CONTENT 100%

ELECTRICAL RESISTANCE 30,000 megohms

DIELECTRIC STRENGTH 300 volts/mil

UPPER TEMPERATURE LIMITS

Continuous 250°F (121°C)

Intermittent 300°F (149°C)

CHEMICAL RESISTANCE

Resistant to hydrocarbons, ketones, alcohols, esters,

halocarbons, aqueous salt solutions and dilute acids

and bases.

How To Use:CUT,MIX & APPLY

Certified for use in contact with drinking water.

1.Repairs small engine parts, holes in truck and

Auto gas tanks, seals leaks, fills cracks and

voids in metal.

2.Forms nuts and bolt repairs , stripped threads

And or machines.

3.Repairs metal tools,equipment, housing, ducts

and appliances. Repairs holes in A/C condensation

pan.  Repair pea traps, Pipes etc.RUST PROOF.

REORDER:WINNER IND SUPPLY :1-877-597-6261

WEBSITE: HTTP://WWW.N2WINNERCHEMICAL.COM